R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

95
Table 21 Command output
Field Descri
p
tion
QueueType
Queue type:
• UNICAST—Unicast queue.
• MULTICAST—Multicast (including broadcast) queue.
• MIXCAST—Mixcast queue, which can accommodate unicast, multicast,
and broadcast traffic.
QueueID Queue number.
Dst-NodeID Peer node number. If no peer node exists, two hyphens (--) are displayed.
Length Queue length (number of packets that can be buffered).
FullTimes Times that the queue is full.
Packet Total number of packets in the queue.
ipc performance enable
Use ipc performance enable to enable IPC performance statistics.
Use undo ipc performance to disable IPC performance statistics.
Syntax
ipc performance enable { node node-id | self-node } [ channel channel-id ]
undo ipc performance enable [ node node-id | self-node ] [ channel channel-id ]
Default
IPC performance statistics is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Enables IPC performance statistics for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
6602 HSR6602 6604/6608/6616
0 to 1 0 to 2
• 0 to 3 for 6604
• 0 to 5 for 6608
• 0 to 9 for 6616
self-node: Enables IPC performance statistics for the local node.
channel channel-id: Enables IPC performance statistics for the channel specified by the channel-id
argument.