R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

151
Port mirroring configuration commands
The following matrix shows the commands and router compatibility:
Commands 6602 HSR6602 6604/6608/6616
Local mirroring
commands
Yes
Yes (only on fixed
interfaces)
Yes (only when SAP modules are
operating in bridge mode)
Remote mirroring
commands
No No
Yes (only when SAP modules are
operating in bridge mode)
display mirroring-group
Use display mirroring-group to display mirroring group information, such as the types, status, and
content of a mirroring group.
Syntax
display mirroring-group { group-id | all | local | remote-destination | remote-source } [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
group-id: Specifies the number of the mirroring group, in the range of 1 to 4.
all: Displays all mirroring groups.
local: Displays local mirroring groups.
remote-destination: Displays remote destination groups.
remote-source: Displays remote source groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The output varies by mirroring group types and is sorted by mirroring group numbers.
Examples
# Display information about all mirroring groups.