R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

164
Field Descri
p
tion
Type DstIP(Port) SrcIP(Port)
Pro ToS If(Direct) Pkts
Statistics of the active flows in the current cache including flow type,
destination IP address (destination port), source IP address (source
port), protocol number, ToS, interface type and name (direction), and
the number of packets.
Flows are classified into the following types: IP flows, L2 flows, IP&L2
flows, MPLS flows with no IP options, and MPLS flows with IP options.
ICMP packets do not contain port number fields, so the type and code
fields are captured. The value for the destination port represents these
two fields. More specifically, the highest 8 bits represent the type field,
and the lowest 8 bits represent the code field. The value for the source
port is set to 0 and does not indicate any statistics.
DstMAC(VLAN) SrcMAC(VLAN)
Layer 2 information about the active flows in the current cache,
including destination MAC address, destination VLAN ID, source
MAC address, and source VLAN ID.
TopLblType(IP/MASK) Lbl-Exp-S-List
Information about the active MPLS flows in the current cache,
including type of the labels at the top of the label stack (IP address and
mask associated with the label), and label list.
A label consists of three fields:
• Label field—20 bits in length.
• Exp field—For QoS, and three bits in length.
• S field—One bit in length. The value of 1 indicates that the label is
at the bottom of the label stack.
Up to three labels can be listed in one label list.
TcpFlag:
DstMask: SrcMask: Nexthop:
DstAS: SrcAS:
BgpNexthop:
OutVRF: InVRF:
SamplerMode: SamplerInt:
Active: Bytes/Pkt:
Other information about the active flows in the cache, including TCP
tag, destination mask, source mask, routing next hop, destination AS,
source AS, BGP next hop, VPN to which the outbound packets
belong, VPN to which the inbound packets belong, sampling mode
(F/D/R), sampling interval, flow active time, number of bytes in each
packet.
NetStream supports the following sampling modes:
• 0—No sampling.
• 1—Fixed sampling.
• 2—Random sampling.
display ip netstream export
Use display ip netstream export to view statistics about NetStream data export.
Syntax
display ip netstream export [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level