R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

65
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] username administrator
Related commands
• password
• operation
vpn-instance (ICMP echo operation view)
Use vpn-instance to apply the ICMP echo operation to the specified VPN.
Use undo vpn-instance to restore the default.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The ICMP echo operation applies to the public network.
Views
ICMP echo operation view
Default command level
2: System level
Parameters
vpn-instance-name: Specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Examples
# Specify vpn1 as the MPLS L3VPN.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1
NQA server configuration commands
NOTE:
You only need to configure the NQA server for UDP jitter, TCP, UDP echo, and voice operations.
display nqa server status
Use display nqa server status to display NQA server status.
Syntax
display nqa server status [ | { begin | exclude | include } regular-expression ]