R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

89
Dst-NodeID LinkStatus
-------------------------------------------
1 DOWN
2 DOWN
The output shows that the connections of the local node to peer node 1 and peer node 2 are down.
Table 16 Command output
Field Descri
p
tion
Dst-NodeID Number of the peer node.
LinkStatus
Link status:
• UP—The connection has been established.
• DOWN—The connection has been terminated.
display ipc multicast-group
Use display ipc multicast-group to display multicast group information for a node.
Syntax
display ipc multicast-group { node node-id | self-node } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Displays multicast group information for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
6602 HSR6602 6604/6608/6616
0 to 1 0 to 2
• 0 to 3 for 6604
• 0 to 5 for 6608
• 0 to 9 for 6616
self-node: Displays multicast group information for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display multicast group information for node 6.