R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

274
Parameters
Specifies an interface card by its slot number.
The following matrix shows the slot slot-number option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
Examples
# Enable the encryption engine.
<Sysname> system-view
[Sysname] cryptoengine enable
display ipsec policy
Use display ipsec policy to display information about IPsec policies.
Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specified IPsec policy or IPsec policy group.
policy-name: Name of the IPsec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPsec policy, in the range 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays detailed information about all IPsec
policies.
If you specify the name policy-name option but leave the seq-number argument, the command displays
detailed information about the specified IPsec policy group.
Examples
# Display brief information about all IPsec policies.