R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

429
Default command level
2: System level
Parameters
slot slot-number: Clears the session statistics on the specified card. The slot-number argument specifies
the slot where the card resides.
The following matrix shows the slot slot-number option and hardware compatibility:
Hardware Com
p
atibilit
y
6602 No
HSR6602 Yes
6604/6608/6616 Yes
Usage guidelines
If no slot number is specified, the command clears the session statistics on all cards.
Examples
# Clear all session statistics.
<Sysname> reset session statistics
session aging-time
Use session aging-time to set the aging timer for sessions of a specified protocol that are in a specified
state.
Use undo session aging-time to restore the default. If no keyword is specified, the command restores the
session aging timers for all protocol states to the defaults.
Syntax
session aging-time { accelerate | fin | icmp-closed | icmp-open | rawip-open | rawip-ready | syn |
tcp-est | udp-open | udp-ready } time-value
undo session aging-time [ accelerate | fin | icmp-closed | icmp-open | rawip-open | rawip-ready |
syn | tcp-est | udp-open | udp-ready ]
Default
The defaults vary with device models.
Views
System view
Default command level
2: System level
Parameters
accelerate: Specifies the aging timer for the sessions in the accelerate queue.
fin: Specifies the aging timer for the TCP sessions in the FIN_WAIT state.
icmp-closed: Specifies the aging timer for the ICMP sessions in the CLOSED state.
icmp-open: Specifies the aging timer for the ICMP sessions in the OPEN state.