R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

35
undo domain if-unknown
Default
No ISP domain is specified for users with unknown domain names.
Views
System view
Default command level
3: Manage level
Parameters
isp-name: Specifies an ISP domain name, a case-insensitive string of 1 to 24 characters that cannot
contain the slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left angle bracket (<), right
angle bracket (>), quotation marks ("), and at sign (@).
Usage guidelines
The device chooses an authentication domain for each user in the following order:
• The authentication domain specified for the access module
• The ISP domain in the username
• The default ISP domain of the device
• The ISP domain specified for users with unknown domain names
If all the domains are unavailable, user authentication fails.
NOTE:
Support for the authentication domain confi
g
uration depends on the access module. You can specify an
authentication domain for 802.1X, portal, or MAC address authentication.
Examples
# Specify the ISP domain test for users with unknown domain names.
<Sysname> system-view
[Sysname] domain if-unknown test
Related commands
domain default enable
idle-cut enable
Use idle-cut enable to enable the idle cut function and set the relevant parameters.
Use undo idle-cut enable to restore the default.
Syntax
idle-cut enable minute [ flow ]
undo idle-cut enable
Default
The function is disabled.