R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

81
• When the status of a RADIUS server changes. If a NAS sends a request but receives no response
before the maximum number of attempts is exceeded, it places the server to the blocked state and
sends a trap message. If a NAS receives a response from a RADIUS server it considered
unreachable, it considers that the RADIUS server is reachable again and also sends a trap
message.
• When the ratio of the number of failed transmission attempts to the total number of authentication
request transmission attempts reaches the threshold.
Examples
# Enable the device to send traps in response to accounting server reachability changes.
<Sysname> system-view
[Sysname] radius trap accounting-server-down
reset radius statistics
Use reset radius statistics to clear RADIUS statistics.
Syntax
reset radius statistics [ slot slot-number ]
Views
User view
Default command level
2: System level
Parameters
slot slot-number: Specifies the RADIUS statistics for the card in the slot represented by the slot-number
argument.
Usage guidelines
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
Related commands
display radius statistics
reset stop-accounting-buffer (for RADIUS)
Use reset stop-accounting-buffer to clear buffered stop-accounting requests for which no responses have
been received.