R3102-R3103-HP 6600/HSR6600 Routers Security Configuration Guide

164
Figure 65 Adding an IP address group
3. Add a portal device:
a. Select User Access Manager > Portal Service > Device from the navigation tree to enter the
portal device configuration page.
b. Click Add to enter the page shown in Figure 66.
c. Enter the device name NA
S, enter the virtual IP address of the VRRP group that holds the
portal-enabled interface, and enter the key, which must be the same as that configured on the
routers.
d. Set whether to enable IP address reallocation.
This example uses direct portal authentication, and therefore select No from the Reallocate IP
list.
e. Set whether to support the portal server heartbeat and user heartbeat functions.
In this example, select No for both Support Server Heartbeat and Support User Heartbeat.
f. Click OK.
Figure 66 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure 67, cl
ick the icon in the Port Group Information Management column of
device NAS to enter the port group configuration page.