R3303-HP 6600/HSR6600 Routers ACL and QoS Command Reference

141
Views
Protocol group view
Default command level
2: System level
Parameters
protocol-name: Protocol name, a string of 1 to 31 characters.
Usage guidelines
Only the protocols included in the signature file can be added to a protocol group. If an existing protocol
in the protocol group is not included in the signature file to be loaded, the protocol is removed from the
protocol group automatically when the new signature file is loaded.
Examples
# Add protocol MSN to protocol group 1.
<Sysname> system-view
[Sysname] dar protocol-group 1
[Sysname-protocol-group-1] protocol msn
reset dar protocol-statistic
Use reset dar protocol-statistic to clear the DAR protocol statistics for a specific interface or all interfaces.
Syntax
reset dar protocol-statistic p2p [ interface interface-type interface-number ]
reset dar protocol-statistic interface interface-type interface-number p2p
Views
User view
Default command level
1: Monitor level
Parameters
p2p: Clears P2P traffic statistics.
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear the FTP statistics of GigabitEthernet 1/0/1.
<Sysname> reset dar protocol-statistic p2p interface GigabitEthernet 1/0/1
Or
<Sysname> reset dar protocol-statistic interface GigabitEthernet 1/0/1 p2p