R3303-HP 6600/HSR6600 Routers ACL and QoS Command Reference

32
Views
IPv4 basic/advanced ACL view, IPv6 basic/advanced ACL view, Ethernet frame header ACL view
Default command level
2: System level
Parameters
step-value: ACL rule numbering step in the range of 1 to 20.
Usage guidelines
After you restore the default numbering step by using the undo step command, the rules are renumbered
in steps of 5.
Examples
# Set the rule numbering step to 2 for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
# Set the rule numbering step to 2 for IPv6 basic ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] step 2
Related commands
• display acl
• display acl ipv6
time-range
Use time-range to configure a time range. If you provide an existing time range name, the command
adds a statement to the time range.
Use undo time-range to delete a time range or a statement in the time range.
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from
time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ]
| from time1 date1 [ to time2 date2 ] | to time2 date2 ]
Default
No time range exists.
Views
System view
Default command level
2: System level