R3303-HP 6600/HSR6600 Routers ACL and QoS Command Reference

68
Command 6602 HSR6602 6604/6608/6616
qos vlan-policy No No
Yes on routers installed with the MPU RPE-X1
or RSE-X1
Examples
# Apply the QoS policy test to the inbound direction of VLAN 200, VLAN 300, VLAN 400, and VLAN
500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound
reset qos vlan-policy
Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.
Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Views
User view
Default command level
1: Monitor level
Parameters
vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094.
inbound: Clears the statistics of the QoS policy applied in the inbound direction of the specified VLAN.
outbound: Clears the statistics of the QoS policy applied in the outbound direction of the specified
VLAN.
Usage guidelines
If no direction is specified, the statistics of the QoS policies in both directions of the VLAN are cleared.
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
reset qos vlan-policy No No
Yes on routers installed with the MPU RPE-X1
or RSE-X1
Examples
# Clear the statistics of QoS policies applied to VLAN 2.
<Sysname> reset qos vlan-policy vlan 2