R3303-HP 6600/HSR6600 Routers ACL and QoS Command Reference

87
PQ commands
display qos pq interface
Use display qos pq interface to display the Priority Queuing (PQ) configuration and statistics of an
interface or all the interfaces.
Syntax
display qos pq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the PQ configuration and statistics of all interfaces.
If a VT interface is specified, this command displays QoS PQ information of all VA interfaces inheriting
the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the PQ configuration and statistics of GigabitEthernet 1/0/1.
<Sysname> display qos pq interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (Priority queuing : PQL 1 Size/Length/Discards)
Top: 0/20/0 Middle: 0/40/0 Normal: 0/60/0 Bottom: 0/80/0
Table 28 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Output queue information.
Priority queuing Priority queuing. The PQ list in use is displayed.