R3303-HP 6600/HSR6600 Routers Configuration Guides Index

backing up startup configuration file to TFTP
server, FM-107
configuration file, FM-103
deleting startup configuration file, FM-108
MPU software synchronization, FM-112
next-startup configuration file redundancy,
FM-103
restoring startup configuration file from TFTP
server, FM-108
specifying next-startup configuration file,
FM-107
startup configuration file
backing up to TFTP server, FM-107
deleting, FM-108
restoring from TFTP server, FM-108
starvation attack protection
DHCP relay agent, IPSER-59
DHCP snooping, IPSER-76
state
active (DLDP link), HA-34
advertisement (DLDP link), HA-34
configuring IPv6 PIM-DM state-refresh,
MCAST-328
delaydown (DLDP link), HA-34
disable (DLDP link), HA-34
DLDP state and packet type, HA-37
enabling BGP session state change logging,
IPR-241
enabling IPv6 PIM-DM state-refresh,
MCAST-327
enabling OSPF neighbor state change logging,
IPR-84
Ethernet interface physical state change
suppression configuration, IF-5
Ethernet link aggregation aggregate interface
link state trap configuration, LSW-25
Ethernet link aggregation member port, LSW-13
inactive (DLDP link), HA-34
initial (DLDP link), HA-34
logging IPv6 BGP peer/peer group state
change, IPR-368
MLDv2 receiver host state listening, MCAST-285
MLDv2 state, MCAST-285
MSTP port, LSW-52
PIM-DM state-refresh, MCAST-111
probe (DLDP link), HA-34
resetting (DLDP), HA-43
resetting DLDP state in port/port group view,
HA-44
resetting DLDP state in system view, HA-44
RRPP ring disconnect state, HA-75
RRPP ring health state, HA-75
STP port state transition information output,
LSW-68
troubleshooting MSDP peer stays in down state,
MCAST-198
two-way (DLDP neighbor), HA-39
unidirectional (DLDP neighbor), HA-39
unknown (DLDP neighbor), HA-39
state (configuring RSVP-TE timer MPLS TE), MPLS-63
stateful address (IPv6 autoconfiguration), IPSER-132
stateful failover
configuration, HA-204, HA-205, HA-207
configuration guideline, HA-208
configuring failover interface, HA-206
displaying, HA-207
enabling, HA-206
maintaining, HA-207
operating procedure, HA-204
overview, HA-204
specifying device ID used in stateful failover
mode (AAA), SEC-53
state, HA-204
stateful failover state
independence, HA-205
silence, HA-205