R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

119
the running configuration directly overwrites the old configuration file without backing up the file. HP
recommends that you enter Y or y and manually copy the backup file _config_bak.cfg on the active MPU
to the standby MPU.
# Save the running configuration to the configuration file test.cfg on the standby MPU in slot 1.
• Method 1:
<Sysname> save test.cfg slot 1
The current configuration will be saved to slot1#cfa0:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration slot1#cfa0:/test.cfg. Please wait...
........
Configuration is saved to slot1#cfa0 successfully.
• Method 2:
<Sysname> save slot1#cfa0:/test.cfg
# Save the running configuration to the main next-startup configuration file without any confirmation
required.
<Sysname> save force
Validating file. Please wait.....................
The current configuration is saved to the active main board successfully.
Slot 1:
The current configuration file is saved successfully.
Configuration is saved to device successfully.
Related commands
6602/HSR6602:
• display current-configuration
• display saved-configuration
• reset saved-configuration
6604/6608/6616:
• display current-configuration
• display saved-configuration
• reset saved-configuration
• slave auto-update config
slave auto-update config
Use slave auto-update config to enable the configuration auto-update function for the standby MPU to
automatically save the running configuration as the active MPU does when you execute the save [ safely ]
[ backup | main ] [ force ] command or the save file-url all command.
Use undo slave auto-update config to disable the function.
Syntax
slave auto-update config
undo slave auto-update config