R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

156
Table 24 Command output
Field Descri
p
tion
Slot No. Number of the slot where the card resides.
Card Type Hardware type of the card.
Status
Card status:
• Fault—Error occurred, and the card cannot start correctly.
• Normal—The card is operating correctly.
Max Ports Maximum number of physical ports that the card supports.
# On an HSR6602, 6604, 6608, or 6616, display device information.
<Sysname> display device
System-mode(Current/After Reboot): Normal/Normal
Slot No. Board type Status Primary SubSlots
---------------------------------------------------------------------
0 RPE-X1 Normal Master 0
1 N/A Absent N/A N/A
2 N/A Absent N/A N/A
3 N/A Absent N/A N/A
4 FIP-200 Normal N/A 2
5 N/A Absent N/A N/A
Table 25 Command output
Field Descri
p
tion
Slot No. Slot number of a card.
Board type Hardware type of a card.
Status
Card status:
• Slave—The card is a standby MPU.
• Master—The card is an active MPU.
• Absent—No card is in the slot.
• Fault—Error occurred, and the card cannot start correctly.
• Normal—The card is an interface card and is operating correctly.
Primary
Whether the card is an active MPU or standby MPU. For a non-MPU
card, the value of this field is N/A.
Subslots Maximum number of subcards that a card supports.
display device manuinfo
Use display device manuinfo to display the electronic label data for the device.
Syntax
display device manuinfo [ fan fan-id |slot slot-number [ subslot subslot-number ] ] [ | { begin | exclude
| include } regular-expression ]