R3303-HP 6600/HSR6600 Routers High Availability Command Reference

4
Syntax
slave switchover { disable | enable }
Default
Manual configuration of the switchover between the active MPU and standby MPU is enabled.
Views
System view
Default command level
2: System level
Parameters
disable: Disables manual switchover between the active MPU and standby MPU.
enable: Enables manual switchover between the active MPU and standby MPU.
Examples
# Enable manual switchover between the active MPU and standby MPU.
<Sysname> system-view
[Sysname] slave switchover enable
Related commands
slave switchover