R3303-HP 6600/HSR6600 Routers High Availability Command Reference

99
undo rpr mate smart-connect
Default
RPR mate port smart connection is disabled.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Usage guidelines
When the two RPR physical ports are on the same subcard—in centralized RPR, you can enable RPR
mate port smart connection. With the function enabled, RPR automatically connects the two mate ports
without you having to connect them manually.
Examples
# Enable RPR mate port smart connection on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr mate smart-connect
rpr protect-mode
Use rpr protect-mode to set the RPR protection mode for the station.
Use undo rpr protect-mode to restore the default.
Syntax
rpr protect-mode { steer | wrap }
undo rpr protect-mode
Default
The steering protection mode is used.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
steer: Sets the protection mode to steering where the source station directs protected frames to the ringlet
that retains connectivity to their destinations.
wrap: Sets the protection mode to wrapping where protected traffic is directed at the point of failure to
the opposing ringlet.
Examples
# Adopt the wrapping protection mode on the station of Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr protect-mode wrap