R3303-HP 6600/HSR6600 Routers High Availability Command Reference

105
Do not use the service command to configure the MPU to forward traffic of the interface on an
6604/6608/6616 router, because traffic forwarding is performed by LPUs on these routers.
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
service No Yes Yes
Examples
# Specify the card in slot 2 to process traffic for Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] service slot 2
shutdown
Use shutdown to shut down the interface.
Use undo shutdown to bring up the interface.
Syntax
shutdown
undo shutdown
Default
An interface is enabled.
Views
Layer 3 RPR logical interface view, RPRPOS interface view
Default command level
2: System level
Examples
# Shut down Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] shutdown
# Shut down RPR physical port RPRPOS 2/1/1.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] shutdown
threshold
Use threshold to set the SD or SF alarm threshold for the interface.
Use undo threshold to restore the default.