R3303-HP 6600/HSR6600 Routers High Availability Command Reference

184
Default
No failover interface is specified.
Views
System view
Default command level
2: System level
Parameters
interface-type: Interface type.
interface-number: Interface number.
Usage guidelines
A failover interface can only forward state negotiation messages and backup data.
Examples
# Specify GigabitEthernet 0/0/1 as a failover interface.
<Sysname> system-view
[Sysname] dhbk interface gigabitethernet 0/0/1
display dhbk status
Use display dhbk status to display the stateful failover status information.
Syntax
display dhbk status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the stateful failover status information.
<Sysname> display dhbk status
DHBK State: Enable
Backup Type: Symmetric path
Current state: Synchronization
Current port: