R3303-HP 6600/HSR6600 Routers High Availability Command Reference

3
slave restart
Use slave restart to manually restart the standby MPU.
Syntax
slave restart
Views
System view
Default command level
2: System level
Examples
# Restart the standby MPU.
<Sysname> system-view
[Sysname] slave restart
The slave will reset! Continue?[Y/N]:y
slave switchover
Use slave switchover to manually configure the switchover between the active MPU and standby MPU.
Syntax
slave switchover
Views
System view
Default command level
2: System level
Examples
# Manually configure the switchover between the active MPU and the standby MPU.
<Sysname> system-view
[Sysname] slave switchover
Caution!!! Confirm to switch slave to master?[Y/N] y
Starting.....
RAM Line....OK
Related commands
slave switchover { disable | enable }
slave switchover { disable | enable }
Use slave switchover disable to disable manual switchover function between the active MPU and standby
MPU.
Use slave switchover enable to enable manual switchover function between the active MPU and standby
MPU.