R3303-HP 6600/HSR6600 Routers High Availability Command Reference

91
frame-format
Use frame-format to set the framing format on the interface.
Use undo frame-format to restore the default.
Syntax
frame-format { sdh | sonet }
undo frame-format
Default
The framing format is SDH.
Views
RPRPOS interface view
Default command level
2: System level
Parameters
sdh: Sets the framing format to SDH.
sonet: Sets the framing format to SONET.
Examples
# Set the framing format on interface RPRPOS 2/1/1 to SONET.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] flag j1 ignore
interface rpr
Use interface rpr to create an RPR logical interface and enter RPR logical interface view.
Use undo interface rpr to remove an RPR logical interface.
Syntax
interface rpr interface-number
undo interface rpr interface-number
Views
System view
Default command level
2: System level
Parameters
rpr: Specifies a Layer 3 RPR logical interface.
interface-number: Number of the RPR logical interface.