R3303-HP 6600/HSR6600 Routers Interface Command Reference

3
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/),
spaces, and other Unicode characters and symbols.
When you specify a description, follow these guidelines:
• Each Unicode character takes the space of two regular characters.
• To use Unicode characters or symbols in an interface description, install the specific input method
editor and log in to the device through remote login software that supports the character type.
• When the length of a description string reaches or exceeds the maximum line width on the terminal
software, the software starts a new line, possibly breaking a Unicode character in half. This might
result in garbled characters at the end of a line.
Examples
# Change the description of interface GigabitEthernet 4/0/1 to lanswitch-interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/0/1
[Sysname-GigabitEthernet4/0/1] description lanswitch-interface
# Change the description of Ethernet subinterface GigabitEthernet 4/0/1.1 to l2-subinterface4/0/1.1.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/0/1.1
[Sysname-GigabitEthernet4/0/1.1] description l3-subinterface4/0/1.1
Related commands
display interface
display counters
Use display counters to display traffic statistics for interfaces.
Syntax
display counters { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.