R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

238
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer 131.108.1.1 enable
[Sysname-bgp-af-mul] peer 131.108.1.1 keep-all-routes
peer next-hop-local (MBGP address family view)
Use peer next-hop-local to specify the router as the next hop for routes sent to a peer or a peer group.
Use undo peer next-hop-local to remove the configuration.
Syntax
peer { group-name | ip-address } next-hop-local
undo peer { group-name | ip-address } next-hop-local
Default
The routes advertised to an EBGP peer or a peer group take the local router as the next hop, but the
routes outgoing to an IBGP peer or a peer group do not take the local router as the next hop.
Views
IPv4 MBGP address family view
Default command level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
Examples
# In IPv4 MBGP address family view, specify the router as the next hop for routes sent to the peer group
test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test internal
[Sysname-bgp] peer test as-number 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test next-hop-local
peer preferred-value (MBGP address family view)
Use peer preferred-value to specify a preferred value for routes received from a peer or peer group.
Use undo peer preferred-value to restore the default value.
Syntax
peer { group-name | ip-address } preferred-value value
undo peer { group-name | ip-address } preferred-value
Default
The default preferred value is 0.