R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

287
verbose: Displays the detailed information about Layer 2 ports of MLD groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is available only on the router that is installed with the SAP module.
Examples
# Display detailed Layer 2 port information of MLD groups.
<Sysname> display mld group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
GE2/1/1 (D) ( 00:01:30 )
IP group(s):the following ip group(s) match to one mac group.
IP group address: FF03::101
(FE80::1, FF03::101):
Attribute: Host Port
Host port(s):total 1 port(s).
GE2/1/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
GE2/1/2
Table 66 Command output
Field Description
Total 1 IP Group(s). Total number of IPv6 multicast groups.
Total 1 IP Source(s). Total number of IPv6 multicast sources.
Total 1 MAC Group(s). Total number of MAC multicast groups.
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Port flag: D stands for dynamic port, S for static port, and C for port copied
from a (*, G) entry to an (S, G) entry.
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flag: R stands for real egress sub-VLAN under the current entry,
and C for sub-VLAN copied from a (*, G) entry to an (S, G) entry.