R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

310
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld ssm-mapping enable
mld startup-query-count
Use mld startup-query-count to configure the startup query count on the current interface.
Use undo mld startup-query-count to restore the default.
Syntax
mld startup-query-count value
undo mld startup-query-count
Default
The startup query count is set to the MLD querier's robustness variable.
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies a startup query count (the number of queries that the MLD querier sends on startup) in the
range of 2 to 5.
Examples
# Set the startup query count to 3 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld startup-query-count 3
Related commands
• mld robust-count
• startup-query-count
mld startup-query-interval
Use mld startup-query-interval to configure the startup query interval on the current interface.
Use undo mld startup-query-interval to restore the default.
Syntax
mld startup-query-interval interval
undo mld startup-query-interval
Default
The startup query interval is 1/4 of the MLD query interval.
Views
Interface view