R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

313
Use undo mld timer query to restore the default.
Syntax
mld timer query interval
undo mld timer query
Default
The MLD query interval is 125 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD query interval (time between MLD general query messages) in seconds, in the
range of 1 to 18000.
Examples
# Set the MLD query interval to 200 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet2/1/1
[Sysname-GigabitEthernet2/1/1] mld timer query 200
Related commands
• display mld interface
• mld timer other-querier-present
• timer query
mld version
Use mld version to configure the MLD version on the current interface.
Use undo mld version to restore the default MLD version.
Syntax
mld version version-number
undo mld version
Default
The MLD version is MLDv1.
Views
Interface view
Default command level
2: System level
Parameters
version-number: Specifies an MLD version, 1 or 2.