R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

320
Related commands
• mld startup-query-count
• robust-count
startup-query-interval (MLD view)
Use startup-query-interval to configure the startup query interval globally.
Use undo startup-query-interval to restore the default.
Syntax
startup-query-interval interval
undo startup-query-interval
Default
The startup query interval is 1/4 of the "MLD query interval".
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies a startup query interval (interval between general queries that the MLD querier sends
on startup) in seconds, in the range of 1 to 18000.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-interval 5
Related commands
• mld startup-query-interval
• timer query
timer other-querier-present (MLD view)
Use timer other-querier-present to configure the MLD other querier present interval globally.
Use undo timer other-querier-present to restore the default.
Syntax
timer other-querier-present interval
undo timer other-querier-present
Default
MLD other querier present interval = [ MLD query interval ] × [ MLD querier's robustness variable ] +
[ maximum response delay for MLD general queries ] /2.