R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

360
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option neighbor-tracking
Related commands
hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Use pim ipv6 hello-option override-interval to configure the prune override interval on the current
interface.
Use undo pim ipv6 hello-option override-interval to restore the default.
Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds. The value ranges from 1 to 65535.
Examples
# Set the prune override interval to 2,000 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option override-interval 2000
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim ipv6 hello-option lan-delay
pim ipv6 holdtime assert
Use pim ipv6 holdtime assert to configure the assert timeout timer on the current interface.
Use undo pim ipv6 holdtime assert to restore the default.
Syntax
pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
Default
The assert timeout timer is 180 seconds.