R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

361
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.
Examples
# Set the assert timeout timer to 100 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 holdtime assert 100
Related commands
• holdtime assert
• holdtime join-prune
• pim ipv6 holdtime join-prune
pim ipv6 holdtime join-prune
Use pim ipv6 holdtime join-prune to configure the join/prune timeout timer on the interface.
Use undo pim ipv6 holdtime join-prune to restore the default.
Syntax
pim ipv6 holdtime join-prune interval
undo pim ipv6 holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.
Examples
# Set the join/prune timeout timer to 280 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 holdtime join-prune 280
Related commands
• holdtime assert
• holdtime join-prune