R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

27
igmp-snooping source-deny
Use igmp-snooping source-deny to enable multicast source port filtering.
Use undo igmp-snooping source-deny to disable multicast source port filtering.
Syntax
igmp-snooping source-deny
undo igmp-snooping source-deny
Default
Multicast source port filtering is disabled.
Views
Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect on IGMP snooping-enabled VLANs and VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Enable source port filtering for multicast data on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] igmp-snooping source-deny
igmp-snooping special-query source-ip
Use igmp-snooping special-query source-ip to configure the source IP address for IGMP group-specific
queries.
Use undo igmp-snooping special-query source-ip to restore the default.
Syntax
igmp-snooping special-query source-ip { ip-address | current-interface }
undo igmp-snooping special-query source-ip
Default
The source IP address of IGMP group-specific queries is 0.0.0.0.
Views
VLAN view
Default command level
2: System level
Parameters
ip-address: Specifies a source address for IGMP group-specific queries.