R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

34
Views
User view
Default command level
2: System level
Parameters
group-address: Specifies an IGMP snooping group in the range of 224.0.1.0 to 239.255.255.255.
all: Specifies all IGMP snooping groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect only in IGMP snooping-enabled VLANs but not in VLANs with IGMP-enabled
VLAN interfaces.
This command cannot remove the static group entries for IGMP snooping groups.
Examples
# Remove the dynamic group entries for all IGMP snooping groups.
<Sysname> reset igmp-snooping group all
reset igmp-snooping statistics
Use reset igmp-snooping statistics to clear statistics for the IGMP messages learned through IGMP
snooping.
Syntax
reset igmp-snooping statistics
Views
User view
Default command level
2: System level
Examples
# Clear the statistics for all IGMP messages learned through IGMP snooping.
<Sysname> reset igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the aging timer for the dynamic router ports globally.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time