R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

43
Value Meanin
g
0x10000 The (S, G) has been updated during the smoothing process.
0x80000
The (S, G) entry has been updated and needs to be deleted before a new entry
is added.
0x100000 An entry is successfully added.
0x1000000 Multicast forwarding entry for BIDIR-PIM.
0x2000000 RP for BIDIR-PIM.
Table 8 Major values of the flags field (after the colon)
Value Meanin
g
0
The entry does not belong to the MPU, or the MPU has synchronized the entry
to other cards.
1
The MPU will synchronize the incoming interface information of the entry to
other cards.
2
The MPU will synchronize the outgoing interface information of the entry to
other cards.
4 The MPU will synchronize the RP information of the entry to other cards.
80
The MPU will synchronize the encapsulation group information of the entry to
other cards.
80000000 The MPU will notify other cards to add the entry.
40000000 The MPU will notify other cards to remove the entry.
Related commands
• display multicast routing-table
• multicast forwarding-table downstream-limit
• multicast forwarding-table route-limit
display multicast forwarding-table df-info
Use display multicast forwarding-table df-info to display the DF information of the multicast forwarding
table.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] forwarding-table df-info
[ rp-address ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPN instances.