R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

55
Related commands
display multicast boundary
multicast forwarding-table downstream-limit
Use multicast forwarding-table downstream-limit to configure the maximum number of downstream
nodes for a single entry in the multicast forwarding table.
Use undo multicast forwarding-table downstream-limit to restore the default.
Syntax
multicast forwarding-table downstream-limit limit
undo multicast forwarding-table downstream-limit
Default
The maximum number of downstream nodes for a single multicast forwarding entry is 128.
Views
System view, VPN instance view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (maximum number of outgoing interfaces) for
a single multicast forwarding entry. The value range for this argument is 0 to 128.
Usage guidelines
The system-allowed maximum number varies with different device models.
Examples
# Set the maximum number of downstream nodes for a single multicast forwarding entry on the public
network to 120.
<Sysname> system-view
[Sysname] multicast forwarding-table downstream-limit 120
# Set the maximum number of downstream nodes for a single multicast forwarding entry in VPN instance
mvpn to 60.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast forwarding-table downstream-limit 60
Related commands
display multicast forwarding-table
multicast forwarding-table route-limit
Use multicast forwarding-table route-limit to configure the maximum number of entries in the multicast
forwarding table.
Use undo multicast forwarding-table route-limit to restore the maximum number of entries in the
multicast forwarding table to the system default.