R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

67
Table 17 Command output
Field Descri
p
tion
VLAN(ID) VLAN ID.
(0.0.0.0, 224.1.1.1) (S, G) entry, where "0.0.0.0" means all multicast sources.
Port Member port.
Host Host IP address.
Uptime Host running duration.
Expires Host expiration time, where "timeout" means that the host has expired.
display igmp interface
Use display igmp interface to display IGMP configuration and operation information of the specified
interface or all IGMP-enabled interfaces.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the related information of all IGMP-enabled interfaces.
verbose: Displays the detailed IGMP configuration and operation information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.