R3303-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

180
Use undo lldp timer notification-interval to restore the default.
Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
Default
The LLDP trap transmit interval is 5 seconds.
Views
System view
Default command level
2: System level
Parameters
interval: Sets the LLDP trap transmit interval in the range of 5 to 3600 seconds.
Examples
# Set the LLDP trap transmit interval to 8 seconds.
<Sysname> system-view
[Sysname] lldp timer notification-interval 8
lldp timer reinit-delay
Use lldp timer reinit-delay to set the LLDP re-initialization delay.
Use undo lldp timer reinit-delay to restore the default.
Syntax
lldp timer reinit-delay delay
undo lldp timer reinit-delay
Default
The LLDP re-initialization delay is 2 seconds.
Views
System view
Default command level
2: System level
Parameters
delay: Sets the LLDP re-initialization delay in the range of 1 to 10 seconds.
Examples
# Set the LLDP re-initialization delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer reinit-delay 4