R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

70
Syntax
ppp mp virtual-template number
undo ppp mp
Default
An interface is not bound to a VT interface, and the interface operates in normal PPP mode.
Views
Interface view
Default command level
2: System level
Parameters
number: Number of the VT interface to be bound to the interface, in the range of 0 to 1023.
Usage guidelines
After binding an interface to a VT interface, you can optionally enable PAP, CHAP, MS-CHAP, or
MS-CHAP-V2 authentication.
Interfaces bound to the same VT interface are bound together directly. The ppp mp virtual-template
command and the ppp mp command are mutually exclusive.
Examples
# Bind interface Serial 2/0/1 to VT interface 1. (Assume the interface has PPP encapsulation enabled.)
<Sysname> system-view
[Sysname] interface serial 2/0/1
[Sysname-Serial2/0/1] ppp mp virtual-template 1
reset counters interface mp-group
Use reset counters interface mp-group to clear traffic statistics on MP-group interfaces.
Syntax
reset counters interface [ mp-group [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Number of an MP-group interface.
Usage guidelines
Before collecting traffic statistics within a specific period of time on an MP-group interface, clear the
existing statistics.
If you do not specify the mp-group keyword, this command clears statistics on all interfaces.
If you specify the mp-group keyword without the interface-number argument, this command clears
statistics on all MP-group interfaces.