R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

In addition, you can check the state of MP virtual channels by checking the state of virtual access

interfaces by using the display virtual-access command.

(Method 2) Associate the remote username with a VT interface.

6. Configure Router A:

# Configure the username and password of Router B.

<RouterA> system-view

[RouterA] local-user rtb

[RouterA-luser-rtb] password simple rtb

[RouterA-luser-rtb] service-type ppp

[RouterA-luser-rtb] quit

# Specify a VT interface to user RTB.

[RouterA] ppp mp user rtb bind virtual-template 1

# Create the VT interface and configure its IP address.

[RouterA] interface virtual-template 1

[RouterA-Virtual-Template1] ip address 8.1.1.1 24

[RouterA-Virtual-Template1] ppp mp binding authentication

[RouterA-Virtual-Template1] quit

# Configure Serial 2/0/2.

[RouterA] interface serial 2/0/2

[RouterA-Serial2/0/2] link-protocol ppp

[RouterA-Serial2/0/2] ppp authentication-mode pap domain system

[RouterA-Serial2/0/2] ppp pap local-user rta password simple rta

[RouterA-Serial2/0/2] ppp mp

[RouterA-Serial2/0/2] shutdown

[RouterA-Serial2/0/2] undo shutdown

[RouterA-Serial2/0/2] quit

# Configure Serial 2/0/1.

[RouterA] interface serial 2/0/1

[RouterA-Serial2/0/1] link-protocol ppp

[RouterA-Serial2/0/1] ppp authentication-mode pap domain system

[RouterA-Serial2/0/1] ppp pap local-user rta password simple rta

[RouterA-Serial2/0/1] ppp mp

[RouterA-Serial2/0/1] shutdown

[RouterA-Serial2/0/1] undo shutdown

[RouterA-Serial2/0/1] quit

# Configure local authentication for the PPP users in the default ISP domain system.

[RouterA] domain system

[RouterA-isp-system] authentication ppp local

[RouterA-isp-system] quit

7. Configure Router B:

# Configure the username and password of Router A.

<RouterB> system-view

[RouterB] local-user rta

[RouterB-luser-rta] password simple rta

[RouterB-luser-rta] service-type ppp

[RouterB-luser-rta] quit