R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

202
Parameters
ip-prefix ip-prefix-name: Specifies the name of an IP prefix list, a case-sensitive string of 1 to 19
characters.
tag tag-value: Specifies a tag value in the range of 1 to 4294967295.
Usage guidelines
If no IS-IS route is assigned a high priority, IS-IS host routes are processed first in network convergence
because they have higher priority than other types of IS-IS routes.
Examples
# Assign a high priority to the IS-IS routes matching IP prefix list standtest.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] priority high ip-prefix standtest
reset isis all
Use reset isis all to clear all IS-IS data structure information.
Syntax
reset isis all [ process-id | vpn-instance vpn-instance-name ]
Default
No data structure information is cleared.
Views
User view
Default command level
2: System level
Parameters
process-id: Clears the data structure information of an IS-IS process numbered from 1 to 65535.
vpn-instance vpn-instance-name: Clears the data structure information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the data
structure information of the public network is cleared.
Usage guidelines
Use this command when the LSP needs to be updated immediately. For example, after executing the
area-authentication-mode and domain-authentication-mode commands, use the reset isis all command
to clear old LSPs.
Examples
# Clear all IS-IS data structure information.
<Sysname> reset isis all
Related commands
• area-authentication-mode
• domain authentication-mode