R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

250
Parameters
timer: Time to wait for the End-of-RIB marker, in the range of 3 to 300 seconds.
Usage guidelines
After a BGP session has been successfully (re)established, the End-of-RIB marker must be received within
the time specified with this command.
Using this command can speed up route convergence.
Before configuring this command, you must enable the BGP Graceful Restart capability.
Examples
# Set the time to wait for the End-of-RIB marker on the local end to 100 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart timer wait-for-rib 100
Related commands
graceful-restart
group (BGP/BGP-VPN instance view)
Use group to create a peer group.
Use undo group to delete a peer group.
Syntax
group group-name [ external | internal ]
undo group group-name
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
external: Creates an EBGP peer group, which can be the group of another sub AS in a confederation.
internal: Creates an IBGP peer group.
Usage guidelines
An IBGP peer group is created if neither internal nor external is specified.
Examples
# In BGP view, create an EBGP peer group test with AS number 200, and add EBGP peers 10.1.1.1 and
10 .1. 2.1 i n t o t h e g r o u p .
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] peer 10.1.1.1 group test