R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

66
Examples
# Configure the remote peer IP address as 3.3.3.3.
<Sysname> system-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3
Related commands
mpls ldp remote-peer
remote-ip bfd
Use remote-ip bfd to enable BFD to detect the IP connectivity to the remote LDP peer.
Use undo remote-ip bfd to disable BFD detection of the IP connectivity to the remote LDP peer.
Syntax
remote-ip bfd
undo remote-ip bfd
Default
BFD detection is disabled.
Views
MPLS LDP remote peer view
Default command level
2: System level
Examples
# Enable BFD to detect the IP connectivity to the remote LDP peer bji.
<Sysname> system-view
[Sysname] mpls ldp remote-peer bji
[Sysname-mpls-ldp-remote-bji] remote-ip bfd
reset mpls ldp
Use reset mpls ldp to reset LDP sessions.
Syntax
reset mpls ldp [ all | [ vpn-instance vpn-instance-name ] [ fec mask | peer peer-id ] ]
Views
User view
Default command level
1: Monitor level
Parameters
all: Resets sessions of all LDP instances (including the public one and the private ones).
vpn-instance vpn-instance-name: Resets the LDP sessions of the specified VPN. The vpn-instance-name
argument specifies an MPLS L3VPN by its instance name, a case-sensitive string of 1 to 31 characters.