R3303-HP 6600/HSR6600 Routers OAA Command Reference

28
Field Descri
p
tion
TCPMask
Six bits representing URG mask, ACK mask, PSH mask, RST mask, SYN mask,
and FIN mask respectively from low to high.
For each bit, the value 1 indicates that this bit is concerned, and the value 0
indicates that this bit is not concerned.
Fragment
Whether the packet is a fragment:
• true—The packet is a fragment.
• false—The packet is a non-fragment.
Action Action type, permit, deny, mirror, or redirect.
display acfp rule-info
Use display acfp rule-info to display ACFP rule information.
Syntax
display acfp rule-info { in-interface [ interface-type interface-number ] | out-interface [ interface-type
interface-number ] | policy [ client-id policy-index ] } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
in-interface: Displays ACFP rule information in order of inbound interface. The ACFP rule information
which does not include the inbound interface is not displayed.
out-interface: Displays ACFP rule information in order of outbound interface. The ACFP rule information
which does not include the outbound interface is not displayed.
interface-type interface-number: Specifies an interface by its type and number.
policy: Displays the ACFP rule information in order of policy.
client-id: Specifies an ACFP client ID in the range of 1 to 2147483647.
policy-index: Specifies a policy index in the range of 1 to 2147483647.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When you use this command to display ACFP rule information in order of policy, if you specify neither
client ID nor policy index, the rule information of all policies is displayed.