HP HSR 6600 Router Series - HP A6600_HSR6602-CMW520-R3103P04 Release Notes Release Notes

43
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
==========================================================================
Enter your choice(0-9):
Table 14 BootWare menu options
Item
Description
<1> Boot System
Boot the system software image.
<2> Enter Serial SubMenu
Access the Serial submenu (see Table 17 ) for upgrading system
software through the console port or changing the serial port
settings.
<3> Enter Ethernet SubMenu
Access the Ethernet submenu (see Table 15 ) for upgrading
system software through an Ethernet port or changing Ethernet
settings.
<4> File Control
Access the File Control submenu (see Table 18 ) to retrieve and
manage the files stored on the router.
<5> Restore to Factory Default
Configuration
Dealing with password loss when password recovery capability
is disabled.
<6> Skip Current System Configuration
Start the router with the factory default configuration. This is a
one-time operation and does not take effect at the next reboot.
You use this option when you forget the console login password.
<7> BootWare Operation Menu
Access the BootWare Operation menu for backing up, restoring,
or upgrading BootWare. When you upgrade the system
software image, BootWare is automatically upgraded. HP does
not recommend upgrading BootWare separately. This document
does not cover using the BootWare Operation menu.
<8> Clear Super Password
Clear all super passwords used for switching to higher user
privilege levels.
By default, no super password is required for switching to a
higher user privilege level.
<9> Storage Device Operation
Access the Storage Device Operation menu to manage storage
devices. Using this option is beyond this chapter.
<0> Reboot
Restart the router.
Using TFTP/FTP to upgrade software through an Ethernet port
1. Enter 3 in the BootWare menu to access the Ethernet submenu.
=========================<Enter Ethernet SubMenu>=========================
|Note:the operating device is cfa0 |