HP HSR6600 Router and Router Processing modules series - A6600_HSR6602-CMW520-R3102 Release Notes

14
Then save the configuration and downgrade the code again, login via Telnet and reset all
the passwords as required.
 From the BOOT menu. On boot-up, use Ctrl+B to enter the Boot menu and then force the
unit to use the factory default configuration (bypassing the user configuration). The unit will
then need to be fully reconfigured.
RTD064043
 Symptom: A SAP card fails to forward traffic through a vlanif interface.
 Condition: This symptom might occur when the following conditions exist:
 There are more than two routes, one of which is more specific.
 The more specific route has a vt egress interface, and another route has a vlanif egress
interface.
 Traffic that should be forwarded through the vr interface is forwarded through the vlanif
interface.
 Workaround: None.
List of resolved problems
Resolved Problems in CMW520-R3102
RTD065314
 Symptom: The device fails to ping the IP addresses of some connected servers.
 Condition: This symptom might occur when the following conditions exist:
 The device forwards VPN traffic.
 Multiple IP addresses correspond to one MAC address.
 MAC address moves occur.
RTD064945
 Symptom: Because of the weak cryptographic algorithm there is a risk that the stored passwords
possibly be cracked.
 Condition: Configure password in ciphertext.
RTD064959
 Symptom: Memory leak occurs on some specific LDAP query in SSL VPN feature.
 Condition: Specific LDAP query in SSL VPN.
RTD064960
 Symptom: Buffer overflow occurs on some specific illegal IKE packet.
 Condition: Illegal IKE packet attack.
Resolved Problems in CMW520-R2604P06
RTD063774
 Symptom: A FIP-200 might card fails to forward traffic to other line cards.