HP HSR6600 Router and Router Processing modules series - A6600_HSR6602-CMW520-R3102 Release Notes
19
RTD58155
Symptom: A6600 router takes exception.
Condition: A6600 router configures ACFP to lead forwarding.
RTD58165
Symptom: A6600 router takes exception.
Condition: The usage rate of CPU is too high.
RTD58168
Symptom: A6600 router takes exception.
Condition: Display the neighbor information which length of TLV defined by unknown organize is
more length than 500.
RTD58400
Symptom: The device takes this transceiver as not supported module incorrectly.
Condition: ‘1000_BASE_LX_AN_SFP’ transceiver is installed at A6600 router.
RTD58455
Symptom: IPSEC Packets be discarded in a large amount.
Condition: IPSEC encrypts through software.
RTD58575
Symptom: The device takes exception when the forwarding traffic is too large.
Condition: ‘nat outbound’ and ‘session log’ be configured at tunnel interface.
Resolved Problems in CMW520-R2603P06
RTD58128
Symptom: The device display warning message of not supported transceiver in some special
condition.
Condition: Using supported transceiver.
Resolved Problems in CMW520-R2603P05
RTD58035
Symptom: The memory of the device leaks.
Condition: The head of the HTTP data the device received contains the same field more than once.
RTD58228
Symptom: The device restarts automatically in a greater probability.
Condition: NAT is configured at FIP SAP or A6602, several FTP packages pass ALG at the same
time.










