HP HSR6602 Router Series FAQ

1
HP HSR6602 Router Series FAQ
This document contains the most frequently asked questions about the HSR6602 Router Series.
Q. What models does the HP HSR6602 Router Series include?
A. The HP HSR6602 Router Series includes HSR6602-G and HSR6602-XG.
•
An HSR6602-G router has four GE combo interfaces.
•
An HSR6602-XG router has four GE combo interfaces and two 10 Gbps SFP+ ports.
Q. Does the router support fixed 10 Gbps ports?
A. Only the HSR6602-XG router has two fixed 10 Gbps SFP+ ports.
Q. Does the 10 Gbps SFP+ port on the HSR6602-XG router support the WAN/LAN mode?
A. Yes. The following table describes the technical specifications for the 10 Gbps SFP+ port:
Item
Description
Protocol standard 802.3ae
Connector LC
Supported transceiver
modules
SFP+
Supported physical
layer protocol
10GBASE-R/W
Port speed
• LAN PHY—10.3125 Gbps
• WAN PHY—9.95328 Gbps
Q. What is the memory size for the router?
A. For an HSR6602-G router, the default memory and maximum memory are 2 GB and 4 GB, respectively.
For an HSR6602-XG router, the default memory and maximum memory are both 4 GB.
Q. Is power over Ethernet (PoE) supported on the router?
A. No.
Q. Can I use both AC and DC power supplies on the router at the same time?
A. No.
The router supports 1+1 power supply redundancy. One power supply can meet the power consumption
need of the router. If you use two power supplies, make sure they are the same model.