HP HSR6602 Router Series FAQ

 For the fixed interface, the value of Y is 0.

 Different interfaces on the same HIM/MIM have the same sub-slot number Y.

•

Z—Sequence number of the interface on the HIM/MIM.

For each type of interface, the sequence number Z starts from 0 and is numbered from left to right on the

HIM/MIM.

Figure 1 HSR6602-G slot arrangement

Figure 2 HSR6602-XG slot arrangement

How do I identify the card serial number or manufacturing information?

A. Use the display device manuinfo command on the router. The following is a sample command output:

<HP>display device manuinfo

Slot 0:

DEVICE_NAME:HSR6602-XG

DEVICE_SERIAL_NUMBER:210235A0UXB123000014

MAC_ADDRESS:C4CA-D9DE-0AD4

MANUFACTURING_DATE:2012-03-27

VENDOR_NAME:HP

Can the router automatically adjust the fan speed?

A. Yes. The router can automatically adjust the fan speed based on the temperature in the chassis. You can use

the display fan command to display the fan status. The following is a sample command output:

<HP> display fan

Fan 1 State: Normal