R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

108
automatic methods), restores the default settings of the archive configuration interval and archive
configuration max commands, and clears all configuration archives.
Examples
# On the 6602 router, configure the configuration archive directory and archive file name prefix as
cfa0:/archive/ and my_archive:
1. Create the directory.
<Sysname> mkdir archive
.
%Created dir cfa0:/archive.
2. Specify the directory as the configuration archive directory, and configure an archive file name
prefix.
<Sysname> system-view
[Sysname] archive configuration location cfa0:/archive filename-prefix my_archive
# On the HSR6602 router, configure the configuration archive directory and archive file name prefix as
flash:/archive/ and my_archive:
1. Create the directory.
<Sysname> mkdir archive
.
%Created dir flash:/archive.
2. Specify the directory as the configuration archive directory, and configure an archive file name
prefix.
<Sysname> system-view
[Sysname] archive configuration location flash:/archive filename-prefix my_archive
# On the 6604/6608/6616 router, configure the configuration archive directory and archive file name
prefix as cfa0:/archive/ and my_archive:
1. Create the directory on the active MPU in slot 0.
<Sysname> mkdir cfa0:/archive
.
%Created dir cfa0:/archive.
2. Create the directory on the standby MPU in slot 1.
<Sysname> mkdir slot1#cfa0:/archive
%Created dir slot1#cfa0:/archive.
3. Specify the directory as the configuration archive directory, and configure an archive file name
prefix.
<Sysname> system-view
[Sysname] archive configuration location cfa0:/archive filename-prefix my_archive
Related commands
mkdir
archive configuration max
Use archive configuration max to set the maximum number of configuration archives.
Use undo archive configuration max to restore the default.