R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

112
Table 14 Command output
Field Descri
p
tion
Location Directory for saving running-configuration archives.
Filename prefix File name prefix for configuration archives.
Archive interval in minutes
Interval (in minutes) for the system to automatically archive the running
configuration.
If automatic configuration saving is disabled, this field is not available.
TimeStamp Time when the configuration archive was created.
FileName Configuration archive file name, with the directory excluded.
display current-configuration
Use display current-configuration to display the running configuration.
Syntax
display current-configuration [ configuration [ configuration ] | controller [ interface-type
[ interface-number ] ] | interface [ interface-type [ interface-number ] ] | exclude modules ] [ by-linenum ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
configuration [ configuration ]: Displays feature configuration. The configuration argument specifies a
feature module. If no feature module is specified, this command displays all feature settings you have
made. Available feature settings depend on your configuration. For example:
• system: Displays the system configuration.
• user-interface: Displays the user interface configuration.
controller [ interface-type [ interface-number ] ]: Displays the controller interface configuration, for
example, CE1/PRI interface. For more information, see Interface Configuration Guide.
interface [ interface-type [ interface-number ] ]: Displays interface configuration, where interface-type
represents the interface type and interface-number represents the interface number.
exclude modules: Excludes the configuration of specific modules. The modules argument can be acl, acl6,
or both separated by a space.
• acl: Excludes the IPv4 ACL configuration.
• acl6: Excludes the IPv6 ACL configuration.
by-linenum: Displays the number of each line.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.